10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
208
Direct purchase from the factory 
Kwishyura neza bihamye
Impano y'ubuntu
Politiki yo kohereza
Politiki yo kugaruraImpano y'ubuntu
Murakaza neza kuri Roymall, urubuga rwawe rw'impano zihariye. Turashimira cyane ubufasha bwawe, kandi turabategereza impano y'ubuntu buri guhaha. Shakisha ibyifuzo byawe kandi witegure kubona impano yawe.Politiki yo kohereza
Tuzakora neza kohereza ibintu nyuma yo kubona ibyaguzwe.Mu minsi 2, ibintu bizaba byarangiye.Mu minsi 5-7 (Kuwa mbere kugeza Kuwa gatatu), ibintu bizaba byarangiye.Kohereza kuri ibihugu byinshi bishobora gutwara igihe runaka.1. Politiki yo kugarura
Twemera gusa impano zaguzwe kuri roymall.com. Impano y'ubuntu ntishobora kugarurwa. Kugirango impano ishobore kugarurwa, igomba kuba itarakoreshwa.Nyuma yo kubona inama, subiza impano yawe.Tuzakora impano yawe mu minsi 3-5 nyuma yo kubona.Impano zihariye ntizishobora kugarurwa.Koresha service@roymall.com cyangwa Whatsapp: +86193598494712.Politiki yo kugarura
Uzahabwa impano yawe nyuma yo kuyisubiza. Amafaranga yo kohereza ntayisubizwa.Koresha service@roymall.com cyangwa Whatsapp: +8619359849471
10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
Description:
Charging method: linear charge 1%
Charging current: 1A adjustable
Charge accuracy: 1.5%
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indicator: Red charging green full charge
Charging input interface: Mini USB
Working temperature: -10°C to +85°C
Reverse: NO
Size: 25 x 19 x 10mm
Note:
Ampere meter can only be connected to 5V input end of the module.
It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
The connection wire should not be too long.
Make sure the connect point is good.
If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
Applications:
This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
Package included:
10 x 1A lithium battery charging module
Description:
Charging method: linear charge 1%
Charging current: 1A adjustable
Charge accuracy: 1.5%
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indicator: Red charging green full charge
Charging input interface: Mini USB
Working temperature: -10°C to +85°C
Reverse: NO
Size: 25 x 19 x 10mm
Note:
Ampere meter can only be connected to 5V input end of the module.
It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
The connection wire should not be too long.
Make sure the connect point is good.
If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
Applications:
This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
Package included:
10 x 1A lithium battery charging module
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
nt
nt
